in

Wankel engines in motorcycles. The idea was so beautiful

shaky motors

Wankel engines so. Because we just saw one again. At GeKra motors is a former Norton Wankel police motor. And the engine that almost caused Suzuki's bankruptcy, the RE5, we rode on it and we enjoyed the unique 'round' engine sound.


But the Wankel concept did not make it. A high fuel and oil consumption, the thermal ineffectiveness so that the speed can be roughly read by the color red of the exhaust system. The wear on the sealing strips was also a thing.

Shaky engines: the teething problems

Up to approx. 1970, the seals between the corners of the rotor and the drum wall still had many problems (the motors tend to wear out considerably at this point). From around 1970 these problems are largely solved and the Wankel is just as reliable as an 4 stroke from the same period.

But when the Wankel engines were just there, he got all the attention from a lot of engine manufacturers. Because the idea was great: a small, powerful, vibration-free motor with a minimum of moving parts. An engine whose production costs are also low too. Which engine manufacturer was not waiting for that now.

Good example…

Does follow well. So there was a whole bunch of motorcycle makers who went on engine block hunting. And they came (under license) from NSU and Sachs. The prototypes that resulted were often very nice attempts, just like being more uninhibited things from a pioneer era. And the first Wankel engine? It was in an IFA / MZ. Anton Lupei, designer Erich Machus and test engineer Roland Schuster plus technicians Hans Hofer and Walther Enert built a rotary engine in the chassis of an MZ BK 351. The 24 hp engine was linked to the existing MZ gearbox, which is otherwise identical to that of the BMW R25 was. That prototype was seriously tested. It still exists and currently there are more than 38.000 kilometers on the clock.

The second prototype was made in 1965, using the now well-developed Fichtel & Sachs Wankel engine, which was available worldwide from that year on. Fichtel and Sachs was the second licensee, and Sachs used the Wankel engine as a small, light engine for things like lawn mowers and chainsaws. But for the further developments that were needed to control the wear of the sealing strips in the block and the extremely high operating temperature? There was simply not enough money in MZ's cash for that.

Yamaha is trying too

In 1972, Yamaha obtained a Wankel license and a prototype was quickly made, the RZ201. That was presented at the Tokyo Motor show. The 600 cc twin rotor was liquid cooled and delivered an impressive 66 hp at 6.000 revolutions. The motorcycle looked great, but the fact that it was still far from the practice was apparent, among other things, from the lack of heat shields in the exhaust section.

The Suzuki RE 5 Wankel engine

In 1973, Suzuki presented the RE5 at the Tokyo Motor show after a development time of three years. Its design was experienced as strange. But that was because Suzuki Giorgietto had hired Giugiaro, the car designer, for the looks of the instrument panel. For the rest, the machine looked very much like the Suzuki GT750. The RE5 was heavy, expensive, complicated and thirsty.

DKW and Sachs: The mass producers

In 1974 Fichtel & Sachs came up with the Hercules W2000 with a 294 cc. 20 (later 32) hp air-cooled Wankel engine with a single rotor. And that Hercules was the first truly mass-produced Wankel motorcycle.


Do you like what we write about? This article - like everything else you read here - was brought to you for free. We do not and do not want to do premium items. But we can use your help with that. Therefore subscribe to Auto Motor Klassiek. You will also receive an AMK in your letterbox every month. You can do this via the link above. Or donate a desired amount through our payment page, via this link and mention the donation in the description. Help us keep the daily articles free.


 

4 Comments

Leave a Reply
  1. It is a pity Dolf that you do not call the only serious jerk Superbike. And those still made in the Netherlands; the great Van Veen OCR 1000 with the beautiful Jos Schurgers design

    • Well, I missed that v Veen in the story of a special bike, I have never had to sell a maxda rx2 coupe, but afterwards hey the same story with the commodity a coupe gse stupid stupid?

Give a reaction

The email address will not be published. Required fields are marked with *

Youngtimers in 2018

The new young timers in 2018

Third edition CLASSICSNL: growth while maintaining identity